SupportCategory: Foreground Paralllax20 Fun Informational Facts About Ghost 2 Immobiliser Fitting Near Me
Daniel Schlink asked 3 months ago

Ghost Immobiliser Review

As car theft increases consumers are constantly searching for ways to prevent it. The ghost immobiliser is a revolutionary new device that is able to do exactly that.

It’s the first aftermarket CAN bus immobiliser, which protects your vehicle from key cloning, hacking or keyless entry, and prevents thieves from stealing your vehicle.

No Faraday Bags and Radio Signals

In contrast to other physical anti-theft devices like wheel locks or steering wheel clamps, ghost immobilisers are designed to be hidden and unnoticeable. They are integrated into the buttons of the vehicle and protect against key copying. Ghost immobilisers will stop the engine from starting until you enter a PIN code together with your key fob. The PIN code can be up to 20 presses long and is changed by the driver using an app or buttons on the vehicle. If you forget your pin, or an item breaks or you sell your car, you can use an emergency PIN code that’s unique to each device to reset the system.

Ghost immobilisers also have the benefit of being unnoticeable by diagnostic equipment and don’t emit radio frequency signals. This means that thieves cannot utilize sophisticated scanning techniques to detect a security device. They also use the CAN data network which does not require wire cutting after installation and is more quiet than other immobilisers.

Although ghost immobilisers are not Thatcham approved however they are TASSA approved and some insurance companies offer reduced rates for insurance on vehicles with an aftermarket immobiliser fitted. However, they are accepted as an additional security layer that can deter thieves.

Autowatch Ghost is unlike factory-fitted immobilisers because it is compatible with a variety of vehicles, including motorhomes and vans. It can also be used with electric cars as well as ride-on lawnmowers and motorhomes too. This means it is far more adaptable than other anti-theft technology and can be combined with vehicle trackers to provide the most complete car security package.

MotorGuard will provide you with more details on the brand new Ghost immobiliser from Autowatch. We are Midlands’ leading car security experts and installers and can provide an efficient and friendly service to assist you in securing your pride and joy. We provide a no-obligation estimate on all of our products and services. We can also assist you select the right system for your car.

No Key Fobs or LED Signs

In contrast to a wheel lock or other anti-theft devices that are physically installed, the ghost immobiliser is integrated into your vehicle’s wiring which means it can’t be removed or removed or bypassed. Moreover, because it doesn’t use LED indications or key-fobs it is more difficult to locate and hack than a standard factory-installed immobiliser.

The device functions by connecting to your vehicle’s CAN (Control Area Network) system and it will allow you to enter a unique PIN code push sequence that you select – which could be as long as 20 digits in length – that must be entered before your range rover sport ghost installer Rover or Land Rover J will begin. This is like the way you enter a pin number on your bank card to protect it. It what is ghost immobiliser not affected by cloning or ECU swapping that would normally disable the factory immobiliser.

It is small and weatherproof, making it almost impossible to detect by a burglar. It also communicates with CAN data bus, and as such it operates in a quiet manner, making it difficult to detect. This makes it a perfect addition to your security system and is especially useful because it can be used in conjunction with other Autowatch technologies, such as the Ghost Bluetooth tag, which allows you to start your car without the need to enter your PIN, or the ghost app.

The ghost immobiliser also comes with the benefit of not leaving visible marks inside your vehicle. This is a problem with other security devices that are aftermarket. This is especially appealing to those who want to keep their pride-and-joy as original as possible for reselling.

The Autowatch ghost immobiliser is an TASSA approved product that can reduce your insurance costs because it lowers the risk of your vehicle being stolen. MotorGuard is the Midlands’ most trusted vehicle security specialist and installer. Our certified installers are prepared to fit this discreet and reliable security system for your car’s security. Contact us today to discuss any needs or to make an appointment at our Coventry workshop.

Simple PIN Code Change Process

Ghost immobilisers, unlike key fobs that utilize a code to unlock the ECU of your car and start it to communicate with the ECU through the CAN data network. They are therefore undetectable, quiet and inaccessible to diagnostic tools. These systems can be attached to various vehicles including trucks and motorhomes and plant machinery.

Our Autowatch Ghost system was designed to offer complete protection against theft. It stops your vehicle from being started without a unique PIN code or the smartphone application with the Ghost app downloaded. This is an extremely high-security level that can help protect your vehicle from hacking, key cloning and ECU swapping.

The reason it’s so secure is that there is no requirement to add additional components like key fobs or LED indicators, or a remote. The device utilizes the buttons on your door and steering wheel instead to generate an sequence that can be modified prior to your car’s start. This can be up to 20 times long and is similar to the PIN number on credit card.

In addition it is completely hidden and will not give away the location of the device to thieves. It also doesn’t make use of radio waves and works on the CAN network, which makes it completely inaccessible to thieves using RF scanning devices.

Many car thieves try to remove the CAN chip from the ECU or even replace it to avoid detection, however, this method is only possible by experts who have access to specialised equipment. This is why the ghost immobiliser is so effective and can be used to protect your pride and joy against many different kinds of vehicle thefts.

In addition, it can also be paired with an iPhone that you will require if you want to start the engine while your car is located at work or home. The app will detect the phone and allow you to drive with no needing a PIN. This feature is available on any model of Autowatch Ghost, and you can connect as many smartphones to it as you’d like.

Service Mode

The Autowatch Ghost 2 Immobiliser System is a subtle silent, quiet and next-generation device that safeguards your vehicle unlike any other. It is unnoticeable by thieves & impossible to start without your PIN code or app authorisation. It blocks signal jamming, device spoofing and key cloning, which are all typical techniques used to circumvent the standard immobilisers.

The Ghost is a device which is hidden within the wiring harness that is behind your dashboard. The unit connects to the data network in your CAN vehicle and communicates with the engine control units that make it impossible to start your car if you do not follow the proper sequence. The device is tiny and weatherproof, which makes it invisible to thieves. It can be concealed under a dash panel or beneath the steering wheel, or any other area of the vehicle.

Our installation process is fast and easy with most installations taking about two hours. We provide a complete demonstration of how the Ghost works and handover the owner manuals, Installation certification, the emergency card and ensure you are happy with the product prior to leaving.

We are the only company with this level of accreditation in Ireland. This means that you can be assured that you are getting a expert and high-quality installation.

The Autowatch Ghost is compatible with many vehicles. It can be fitted to motorhomes and caravans, motorcycles and ride-on lawn mowers. As long as there’s a power source it can be equipped with an immobiliser.

The Ghost Immobiliser uses the buttons on your car’s original key fob to generate a secret disarm sequence (like a PIN code) that needs to be entered before the engine can begin. This could be as long as 20 actions, and it can be altered by the driver at anytime. This is a far safer method of security than using the key fob on its own since it guarantees that no one else can operate your vehicle. It also prevents thiefs from attempting to gain access to your key code or information transmitted to the vehicle’s ECU from it.