SupportCategory: Foreground Paralllax10 Things Everybody Gets Wrong About The Word "Ghost Immobiliser"
Nelle Fauver asked 2 months ago

Why You Need a ghost 2 immobiliser fitting near me (Fog-beard.technetbloggers.de)

Modern thieves can steal a vehicle in less than a minute. They make use of the car’s OBD port to hack the ECU & then duplicate a new key, all via an unnoticed laptop inside the car.

The autowatch ghost immobiliser fitting Ghost immobiliser can prevent this by sending pin codes to the buttons on your vehicle (steering wheels and central console). It is completely unnoticeable to anyone in your vehicle.

There are no key fobs or LED indicators to indicate the location of the vehicle.

The ghost immobiliser is the best way to prevent keyless entry theft and key cloning. This device protects your vehicle from these kinds of attacks by blocking the engine after a valid pin code has been entered. This is an effective way to protect your car. Even car insurance companies recognize it as a safety feature that can lower the cost of a policy.

The way in which the ghost works is by connecting to your vehicle’s CAN data network. Once installed by us at Car Theft Solutions it will only start when you enter a specific button sequence using your unique override code. The engine will not start when you attempt to start your vehicle without having the code. The criminal will then realize that they have been caught and are likely to get out of the vehicle and escape.

One of the big advantages of this system is that it does not transmit any signals as trackers, which means that thieves cannot make use of RF signal receivers to pinpoint the location of your Ghost device. It also doesn’t emit any IR (infrared) signals like the usual remote control key fobs or tracker do, which makes it extremely difficult to deceive or hack.

The Ghost also comes with the valet-mode, which can be activated when you are transferring your vehicle to an individual for parking or service. This will turn off the CAN immobiliser for 30mph, and allows you to operate the vehicle in normal mode using your key fob or smartphone app. When the vehicle is set up again, the Ghost will regain full functionality.

Car Theft Solutions is the location to call for information more about Ghost, or should you wish to have it installed in your vehicle. We are a dedicated family run business with over 10 years of experience in security for vehicles including the Ghost immobiliser installation. We are an approved installer for Ghost products and our reputation is built on customer satisfaction.

No hacking or cloning

The Autowatch Ghost immobiliser is one of most advanced on the market. It shields your vehicle from hacking and key cloning, making it nearly impossible to steal. The only way thieves could take your vehicle is to physically tow it away, and even then they won’t be capable of starting the engine.

This is because unlike other immobilisers which only stop your vehicle from starting if they don’t have your fob this clever system actually disconnects your engine control unit so that the vehicle can’t be started. It works by transmitting a signal via buttons on your steering wheel or door panel, or on your central console which can only be disabled by entering the proper pin code configuration It is this feature that makes the Ghost so hard to crack.

Its sleek and discrete design means that it fits into your vehicle seamlessly with no additional keys or LED indications It operates on its own, independent of your factory alarm or tracker. It is also a CAN bus immobiliser which means that it is part of the control area network of your vehicle and doesn’t interfere with any other devices such as the built-in key fob or alarm.

This unique technology isn’t detectable by thieves unlike other systems that rely on codes and RF scanning. It only transmits pin codes in a silent manner through the buttons on your vehicle’s steering wheels or door panels, or central console. The Ghost is a revolutionary device that protects your vehicle from keyless entry and smart key theft by generating an individual, unique pin code that must be entered to deactivate it.

The number of keyless entry vehicles that are on the road is growing. Thieves are getting more sophisticated and use devices to clone your vehicle which can be bought online or in classifieds for under PS15. They can then use this cloned fob to gain access to your vehicle. The standard immobiliser will only stop the car from starting if the criminal has the original key fob. This is not enough security, and it’s easy for criminals to jam or fake signals to unlock your vehicle.

Valet mode

A standard immobiliser fitted to your vehicle has an electronic chip that transmits the signal when you press the key fob button, the system will then look for that specific code that was sent from the key to start the vehicle. If the signal is not able to be detected the system will cut off power and prevent the car from beginning. This is the basis of all aftermarket car immobilisers. It is a vital measure to safeguard your car from being stolen, even if someone has your keys or a device that could enhance the signal of your key fob.

However, a ghost immobiliser installer immobiliser doesn’t only stop that, it goes much further. The system, which is located on the CAN bus of your Mercedes, is programmed with a unique PIN code that has to be entered to start the vehicle. The sequence is then encrypted in your app, and no one else can access it without the same unique pin as you.

The system will also stop cloning, signal jamming and hacking (which thieves can employ to bypass the immobiliser on your vehicle). If a thief gets their hands on the keys to your car or fob, they will not be able to start your vehicle even if it is parked nearby. They could only get your car onto a flatbed truck which is extremely unlikely.

Valet mode is a useful feature that is included with your ghost immobiliser. When activated, the glove box and trunk will be locked to ensure that anyone who steals your car won’t have any personal belongings to carry with them. It will also limit the speed of your Tesla, so that it cannot be driven more than 70mph. It will also disable absurd modes. It will also block your driver profiles and hide your home or work addresses so that no one else can access your personal data on your Tesla dashboard.

If you would like to use your car as valet parking, or service, choose the ‘Valet/Service mode’ on the dashboard app. Enter your 4-digit valet code onto the touchscreen. After this is done, the alarm functions will be removed however it will block the ability to start your car unless a valid pin is entered. This is ideal for people who have to hand over their vehicle to other people like taxi drivers or garage mechanics.

The first aftermarket CAN-bus immobiliser on the world

The Autowatch Ghost offers unparalleled security and is the first aftermarket CAN bus immobiliser in the world. It guards against key cloning or hacking, and even the theft of keys. This is accomplished by working alongside your vehicles current interface. It doesn’t require additional fobs or remotes however, it instead connects to the vehicle’s data network, CAN. This makes it a ‘stealth device.

The device is a circuit board buried in your car’s engine control unit (ECU). It works quietly. Once activated, it’ll prevent the car from starting unless you enter a PIN. This is the number you receive when you request an installation. This number is required to activate valet mode, turn off the alarm, or permit you to leave in the car of your friend (if they have Ghost installed). Ghost installed as well).

It is designed so that it cannot be detected by anyone who looks into your cars interior, does not transmit radio signals and will only be heard when it’s being activated. It can be placed in a variety places, making it virtually impossible to detect. It is also low-maintenance and can be utilized in combination with other anti-theft devices like trackers (Brand dependent), to provide a complete solution.

Many people install ghost immobilisers because they feel that the existing security measures aren’t enough to safeguard their pride and joy. While physical deterrents like steering wheel locks and wheel clamps are a great option, they are not actually considered “theft proof” by thieves because they can be defeated easily with the right tools. A ghost immobiliser is not accessible to thieves since it is integrated into the vehicle and, if activated would shut down the starter motor or the fuel system.

Ghost immobilisers are installed for only PS450 which is a fraction of what other products cost. It also stops your vehicle from being taken. So if you want an extra layer of security to ensure that your car is safe and sound Contact us today and we’ll book it in for you. We accept card payments or provide three months interest free credit through Klarna.