Krystal Garrido asked 2 months ago
How to Replace a Kia Sportage Replacement Key
The key on many Kia models has a keyless entry system built into. The key functions like an remote control and can be exchanged by a Kia dealer.
Key fobs are prone to malfunction for several reasons, including an empty coin battery worn buttons signals, water damage, signal interference and a malfunctioning receiver module. Here are some tips to assist you in getting your 2016 kia optima key fob sportage replacement key to work again.
How to replace a remote key or smartkey
The battery inside your Kia’s smart key will eventually need be replaced, regardless of whether it’s a remote that starts with a push button or a standard metal key that does not contain transponder. This is particularly relevant if your car displays a message telling that the smart key or remote has a low battery.
Luckily, this is quite simple to do. To replace the key fob battery take the mechanical key from the slit in the back of the key fob. Next, pry open the cover. Inside the key fob will be the small screw that holds the battery in its place. Utilizing a small screwdriver loosen the screw and remove the battery that was in place. Insert the new battery and close the cut on the key fob.
When the key fob is equipped with a fresh battery check it by pressing the lock and unlock buttons. If the doors lock and unlock exactly as you expect, then you’re set! You can now utilize the hands-free feature to lock and unlock your kia car key replacement price uk when your fingers get cold or you need to complete errands in Brandon.
Note: Certain key fobs (transponder chip or smart keys) might require their programming done. This requires a particular programming machine that only the dealer or automotive locksmith can access. Other keys (non-transponder metal keys) don’t require programming. If your keys need to be reprogrammed, then you will need to be aware of the key code number printed on the tag that identifies the key and record the number in a secure place.
How do I replace the battery?
If your Kia key fob isn’t responding when you press the lock or unlock button on the fob, this is a sign that the battery should be replaced. A battery that is not functioning properly can cause other issues, such as the check engine light flashing or the engine not turning properly. Fortunately replacing the battery on the key fob is a simple DIY task that requires only the most basic tools.
Make sure that you shut off your vehicle and close all doors prior to starting. Find the small metal or a plastic piece near the bottom of the key fob. Move it until the metal key pops out. The key can be placed inside the driver door handle to unlock your car.
To replace the battery on the key fob, take off the cover on the rear. Utilize a plastic plier tool to remove the latch that holds the black negative cable. Remove the old battery, and then align the new one so that the “+” positive side faces your face and the “negative” negative side is facing towards the fob’s electrical contacts made of metal. Avoid using too much force when pushing the new CR2032 into place to avoid breaking or bending the steel contacts.
After you have installed the new battery after which you turn the key fob off and on in the ignition until the door locks cycle. Then, you can test your Kia key fob and see whether it’s working again.
How do you replace the smart key
You can have the standard keyfob or Smart Key depending on the model of Kia Sportage. The difference between these is that the smart key is equipped with an incredibly small key blade tucked inside it, while the standard fob doesn’t. Both kinds of key fobs contain a battery inside them that will eventually have to be replaced. Fortunately, this is a fairly simple process that takes only two minutes.
Before you start, you will want to ensure that you’re on a level surface with adequate lighting and that the 2011 Kia Sportage Key Fob is off. Keep in mind that the fob is made up of tiny pieces that could fall should you not be careful.
The release button for the small size is located on the lower backside. It can be an oval silver button or a rectangular slot. After pressing this button button, the mechanical blade will come out and you can then open the key fob.
Once the key fob is open, remove the battery that was in it. The new battery is C2032, and can be bought from a local or online auto parts store. After installation you should be able to lock, unlock and start your car with your key fob – even if the engine isn’t running!
How do you replace a broken mechanical key
The Kia key fob is an amazing feature that lets us lock and unlock our car at the push of an button. But like any device it may have issues at times. There are solutions to resolve these issues and keep your key fobs in good working order for a long time.
A dead or weak battery is among the most frequently encountered issues. This can cause the device to stop working entirely or even to stop working intermittently. If this is the problem you should replace the battery an entirely new battery.
If this doesn’t resolve the issue then try using a normal flathead screwdriver and wedge it into the fob’s plastic casing. Be sure not to damage any internal components or scratch the plastic. Once the battery is removed then replace it with a brand new battery.
Close and open the door using the mechanical key. (Every kia fob comes with an emergency mechanical key that fits into the slot). Test the key fob and ensure that it’s working properly. If the key fob not working, contact a dealer or locksmith to solve the issue. Make sure they make you an emergency key that can work for all door and trunk cylinders to avoid lockouts in the future.